6 Best House Wrap for Weather Barrier in 2022

As you proceed to build a new house, you will have hundreds of issues to manage. Among them, preventing water and air infiltration is the obvious and important one.

If the sheathing isn't suitable, the exterior wall will face water infiltration in many ways. There will also be a chance to form condensed air when the cooler outer air meets the hotter inner air.

This condensed air vapor can then get stuck inside the structure and cause risk to the structure. To fight all this, the easiest solution is to use a good house wrap.

But how do you know which is the best house wrap available out there? Well, we're here to guide you down the lane. Let's get going!



Iditor,s Rating


Prime Wrap PR-4575 

5 Out of 5

DuPont Tyvek HomeWrap

5 Out of 5

Kimberly-Clark 45431

5 Out of 5

MFM SubSeal40 Waterproof House Wrap

4.5 Out of 5

TapeSmith House Wrap

4.5 Out of 5

TYPAR DrainableWrap

4 Out of 5

Our Recommended 6 Best House Wrapping Reviews

Here are the stars of our today's show. These technologically advanced house wraps are built to withstand heavy rigors and prevent water penetration but, at the same time, be highly breathable. Give them a read and choose wisely.

1. Prime Wrap PR-4575 Woven Polyethylene House Wrap

Prime Wrap is a fantastic piece of house wrap that is tested and approved by international governing bodies and compliant with the 2015 International Building Code and 2015 International Energy Conservation Code.

Coming to the structure of the wrap, it is wholly woven polyethylene that increases the water-resistance of the wrap. As a result, no water can penetrate inside the structure.

 This woven structure of the wrap does another fantastic thing. Air porosity is an essential factor for any house wrap.

It determines how much air can go through a piece of fabric. If there were no pores in the fabric, it would face a lot more force from the weather.

But due to the pores in the fabric's woven structure, it lets enough amount of air pass through the fabric, which makes it perform appropriately as a weather barrier.

The tensile strength of this wrap is outstanding. The tear resistance is also higher than most of its competitors. So, you know the wrap is less likely to rip during the application or high winds.

Prime Wrap again proves its credibility with the water vapor permeance rating, which is between 5-15.

According to the ASTM E-96 testing method, any house wrap's perm value should be something like this to let the air vapor escape to save the structure.

This UV-resistant and very pliable fabric allow you to easily install it around the edges and corners to make the best house wrap possible.

Highlighted Features:

  • The perforated woven structure of the wrap gives high breathability.
  • Can withstand high winds due to moderate air porosity.
  • Water-resistant, so no moisture can penetrate the walls of your structure.
  • It lets all the water vapor escape through the pores to make your structure safe.
  • High tensile strength, tear-resistant, UV resistant, and highly pliable.

2. DuPont Home Guard House Wrap

DuPont might not be a popular name in the house wrap industry, but Tyvek definitely is.

It has been the name of reliability for so long whenever it comes to keeping your house away from moisture and shielding it against outside air and water.

The non-woven construction of this house wrap is unique as it is highly breathable. Despite its non-woven structure, it allows ample moisture to pass through to keep the inside of your house cool.

It also saves the inner part of the structure of your house and increases durability. The air penetration resistance of this house wrap is less than 0.004 cfm/sq.ft at 1.57 psf, which is enough to withstand heavy winds.

When it comes it water vapor transmission, it can pass 400g of vapor per square meter in just 24 hours.

So, you can clearly see the strength of the wrap and be relaxed because this wrap is gonna keep your house cool in the summer and warm in the winter.

Also, the inside of the house will face minimal humidity all year round to give you a comfortable environment to live in.

As the humidity will be minimal, this house wrap will also help reduce your energy costs. The price of the wrap is also affordable and installing the wrap is a breeze.

Highlighted Features:

  • Non-woven construction yet highly breathable.
  • Resists air and water penetrating from the outside.
  • Has high perm value to keep the inside dry.
  • Tensile strength and tear resistance are up to the mark.
  • Cost-effective and easy solution for house wrapping that is lightweight and durable.

3. Kimberly-Clark Barricade House Wrap

Kimberly-Clark is a renowned name in the world of house wrap and famous for its water channeling technology that creates a liquid barrier to prevent water and air from penetrating your structure.

Meeting all national building codes, this house wrap is perfect for commercial buildings that are 4-storied or below.

Due to the wrap's liquid barrier, it protects the walls from being penetrated by the moisture from the outdoor.

But at the same time, it lets water vapor escape from the inside to prevent condensation from forming in the wall cavities.

Made with UV inhibitors, this house wrap protects against UV for 6 months straight. The construction of the wrap is non-woven, and high surfactant resistance gives protection against oil and soap solutions that might damage the frames or walls of your structure.

The texture of the non-woven house wrap is such that it resists tear, abrasion, and punctures to keep the seal intact.

The tear strength of this wrap is almost 35% stronger than its competitors. So, you know the wrap will be in its place for a long time without encountering any damage on its surface.

The width of this wrap might be a bit small at 5 ft, but it contains 100 ft of wrap in every roll. Plus, installing the wrap is extremely easy, and there is no chance of bruising it even if you are a beginner.

Let Block-IT house wrap take care of your structure and prevent moisture.

Highlighted Features:

  • Non-woven construction of this house wrap comes in 5' X 100' rolls.
  • Water channeling is a unique feature of this wrap that prevents liquid from penetrating inside.
  • Helps water vapor transmission through the barrier to keep the wall cavities dry and secure.
  • Tear, abrasion, and puncture resistance.

4. Best Waterproof House Wrap by MFM

This self-sticking, waterproof membrane has a polymer film with a layer of asphalt adhesive specially formulated with a rubber coating to perform better.

Because of this layer, this wrap achieves the strength of using it on any exterior or siding. The ultimate strength of this wrap lies in its construction.

As the wrap is waterproof, it can be used for sealing everything in your wall frame, whether it is indoor or outdoor.

The temperature range of the SubSeal is broader than many other wraps, so you can easily install it in extreme weather condition.

With the rubberized asphalt adhesive, it can stick to various clean and dry surfaces, which makes it a versatile solution for house wrapping.

You can also cut it according to your desired shape while installing with a regular scissor; it is that flexible. This flexibility helps the membrane adjust itself according to the surface so there will be no chance of falling apart.

It is self-sealing, so you don’t need to put any extra effort to keep it in place while using fasteners. Due to extreme moisture protection, this is ideal for structures that are often exposed to rough weather.

 It gives amazing result in tropical weather conditions. It comes in different widths, like 4-36 inches, but the length of the roll is 75 ft, and the thickness of the roll is 40 mil.

The roll's thickness is uniform through so applying it doesn’t exert that much pressure on you. Overall, a good quality house wrap that you can use to protect your house.

Highlighted Features:

  • The self-adhering wrap consists of a polymer film backed with a rubberized asphalt adhesive layer that sticks to any surface.
  • Very versatile and can be used on different walls, around doors and windows, etc.
  • The flexible membrane expands and contracts in line with the surface to make the wrap durable.
  • Self-sealing and uniform thickness.

5. TapeSmith Tape for House Wrap

This roll from TapeSmith is a good grade of house wrap sheathing tape used to seal or seam the insulations for making a weather barrier.

This kind of barrier keeps unwanted air and water out of your house effectively and makes the inside more comfortable and secure.

The construction of this sheathing tape consists of a flexible white polypropylene that works to seal cany air duct, make weather resistant barriers, etc.

 You can use it both indoor and outdoor due to its high flexibility and high tensile strength. It also has a permanent acrylic adhesive layer that sticks to any clean and dry surface and makes a durable seal.

This seal can resist flame from transferring and moisture from intruding into the structure. It is also weather-resistant and has an extreme temperature range of -65 degrees Fahrenheit to 200 degrees Fahrenheit.

The combination of white polypropylene and acrylic adhesive effectively creates a water and vapor barrier that prevents water intrusion.

But at the same time, it lets the vapor pass through the system to keep the inner environment free from moisture.

As you know, even the smallest amount of moisture can be a great inspiration to mildews for forming and ruining the healthy environment of your house.

This white house wrap effectively fights with all these and ensures a dry and optimum environment for you to live in. Give it a try.

Highlighted Features:

  • Made of polypropylene and acrylic adhesive to adhere to many surfaces.
  • Creates a perfect seal for air ducts and insulation seams.
  • The moisture-resistant outer film creates a weather barrier to stop water intrusion.
  • UV inhibitors are incorporated with the wrap to make it durable even when it is exposed.

6. TYPAR DrainableWrap

The last item on our list is a bit different from other house wraps in terms of texture and function.

It has a higher drainage efficiency than most of its competitors, making it suitable for use in places that need to repel bulk water.

In this situation, TYPAR drainable wrap works on both sides. On one side, it sheds a good amount of water due to the integrated drainage plane.

On the other side, it lets any water that gets in escape the cavity of the wall to prevent mildew from growing.

That's an ultimate combination, as you might already know. But the fascinating factor here with this wrap is its multi-directional fibers.

The fibers are arranged in a way that speeds up the drainage process effectively and makes it suitable for use on exterior walls.

Due to its weather resistance capability, it can be used widely on surfaces that need to fight against weather frequently.

No matter where you install it, you are always guaranteed to have the ultimate protection from this wrap. It is also compliant with the AC38 code for drainage efficiency as per ASTM.

The roll can cover 500 sq. ft of the area, which is a good number in one go. Even if you are using it for the first time, you can easily install the wrap to whatever surface you want.

In our opinion, this house wrap is so underrated and should be praised more for its consistency and durability.

Highlighted Features:

  • Made of fibers that are arranged in multi-direction to create an easy drainage plane.
  • Sheds bulk water easily from exterior walls and keep them safe.
  • Drainage efficiency is certified and faster than most other house wraps.
  • Sticks to any surface and provides enough backing against weather or moisture.

Comparison Table of House Wrap

Product Name


Water Resistance

Vapor Permeability

Prime Wrap PR-




home guard house wrap




Kimberly-Clark 45431




Waterproof House Wrap




TapeSmith White House Wrap




TYPAR DrainableWrap




Types of House Wrapping

In its original form, the WRB was built of asphalt-impregnated felt paper, which is the same material used to underlie roof shingles today. WRBs consisting of plastic cloth, such as Tyvek, have recently been referred to as "house wrap" in some contexts.

  • It is necessary to use Type 1 asphalt felt (tar paper) in order to meet the ASTM D 226 requirements.
  • Grade D construction paper is a kraft paper that has been treated with asphalt and is used under stucco siding.
  • Polyethylene or polypropylene fibers are often used in the production of plastic house coverings.
  • WRB liquid—As an air barrier, this tar-like liquid is applied with a roller or sprayed on using a spray gun.
  • Rigid foam insulation boards—Some rigid foam insulation boards, when properly sealed, can be used as WRBs.
  • The use of OSB sheathing panels with certain coatings can be used as WRB sheathing in certain situations.

House Wrap Installation tips and tricks

Always use the fasteners and sealants specified by the manufacturer.

The following are some general fabric-type house wrap recommendations:

  • Seams should be sealed with the house wrap manufacturer's appropriate tape.
  • Work your way up the course, overlaying lower courses.
  • Wrap around doors and windows for a professional look.
  • Wrap the fabric around the frame of windows and doors.
  • House wrap is used between the top wall plates.
  • Prevent chemicals from coming into contact with the fabric.
  • Extend the house wrap 2 inches above the footing.
  • Install drainage at the bottom of the external siding material if it is recommended.
  • Make use of house wrap staples or nails that have been specifically designed for this purpose. Nails should be 1 inch long and spaced 12 to 18 inches apart.
  • Overlap horizontal wrap joints by 6 inches.
  • Vertical joints should be spaced 6-12 inches apart, depending on the weather.
  • Any step-flashed areas will be wrapped in a lap house.
  • Install a rain screen to prevent moisture from escaping while installing porous siding.

House Wrap Buying Guide

House Wrap Buying Guide

With so many options available on the market, it is really difficult to choose the best house wrap for people who don't have enough technical knowledge about these products.

 So, we came forward and made a comprehensive buying guide that will tell you what to look for when buying a house wrap. Let's see.

Water Resistance

Having this feature is crucial for every house wrap; otherwise, it might not keep water out of the walls.

Different testing methods are used to certify any house wrap's water resistance, but two of them are the most common.

One is the Hydrostatic pressure test, where a great amount of pressure is exerted on the wrap through a water column. The column is usually 55cm or greater in size. This testing method is known as AATCC 127.

Another test is known as the water ponding test, where a pond of 1-inch water is made on the wrap, and the result is observed after two hours. This test is designated as CCMC 07102.

Check for any of these ratings while you buy a house wrap to confirm that the wrap is water-resistant and can keep your walls away from water.

Air Resistance

Though air resistance is less crucial than water resistance, you should never go with a house wrap with poor air resistance. It will result in airflow across the building envelope. Different methods also test air resistance.

No matter what method is used to test a certain house wrap's air resistance, make sure the wrap does its job perfectly.

Vapor Permeability

Permeability is a term used here to denote the amount of vapor transmission across the wrap over a certain period.

 For example, if 400g of vapor can pass through a 1 sq meter area of house wrapper hour, then the vapor permeability of the wrap is 400g/sq meter.

But excess permeability isn't either good for your structures. If the vapor permeability is too high, then the moisture can penetrate the structure from the outside.

So, the vapor permeability should be moderate to balance the inward and outward flow of moisture.

According to various studies, the value of vapor permeability should be between 10 and 20 to be ideal.

Tensile Strength and Tear Resistance

Tensile strength and tear resistance indicate important performance factors that make a house wrap durable and flexible to survive heavy rigors. Choose a house wrap with high tensile strength and tear-resistant to avoid a hassle in the future.

UV Resistance

If a house wrap isn't UV resistant, it might lose its integrity over time if exposed to the sun. To make sure your house wrap doesn't degrade over time, choose something that is UV resistant.

Surfactant Resistant

Surfactants are usually contaminants like soap and oils that reduce the surface tension of a liquid.

As a result, the wraps become more prone to liquid intrusion, which is never good for your wall systems. So, make sure the house wrap you are buying is surfactant resistant.

FAQ About House Wrap

FAQ About House Wrap

Here will be some answers to the most commonly asked questions. People want to know about these topics on house wrap; we hope so, do you. Let's clarify.

Does house wrap really work?

Yes. House wraps are used to prevent moisture and air from entering your house. It makes a weather barrier in the wall systems of your house to protect the walls from the damage of water penetration.

At the same time, house wraps let the vapor inside your house pass through to keep the house dry.

What is the best house wrap?

There is no obvious answer to this question as house wraps can be of different brand and quality.

All might not love the same wrap. So, we leave it to your personal preference. Go through the wraps we have mentioned here and choose the one that is suitable for you.

How long does house wrap last?

It also depends on the brand and the distinct product. Some wraps should be covered within 90 or 120 days, while others might stay exposed for 180 or 270 days. Check the specification of the wrap while buying.

What is the approximate cost of house wrapping?

The cost of installing house wrap might also vary depending on the brand you are using and the place you are working on.

But on average, you will need to spend around $0.15 per square foot of house wrap. To install it, the total price, including the labor cost, will be around $1.10 per square foot.

Is house wrap mandatory?

Well, it is not mandatory. But what is the point of not having house wrap installed under vinyl siding?

You should take house wrap seriously to make your structure secure, even if it isn't mandatory in your local building codes.

Final Words

Having a quality house wrap as a perimeter of the siding leads to a dry and comfortable house where no moisture can hide inside the cavity of the walls. It also works to repel heavy shower and air outward so that no unwanted moisture can intrude inside your house.

Exposing wall systems to moisture can lead them to damage. Mildew can start growing and destroy your valuable structure. So, installing house wrap is a cost-effective and brilliant idea that can save all the sides.

But being careful while buying the best house wrap is the only option as you might not want to waste a bunch of bucks on a wrap that doesn't work properly after installing.

 It's always better to spend some more time judging than repent after buying. Make your choice wisely.

Our Records: Know the actual difference Typar and Tyvek.

Scroll to Top